Traffic Signal Electricians report to a Foreman or person designated by the Supervisor to perform assigned functions in accordance with Watson Electrical s policies and procedures and assist in achieving our Traffic Signal Division's aims, goals and objectives.

General Summary: Work will consist of installation, alterations, additions and/or repairs of traffic signal electrical systems, equipment and associated materials within the electrical construction industry.

Mandatory Hiring Requirements: Resume, References, Background Check, Drug Screen Testing, Valid NC Driver s License, Journeyman License preferred but not required

Responsibilities: Must be able to work within precise limits and standards of accuracy and perform a variety of duties that often change. Must utilize reason and logic to perform mathematical operations rapidly and accurately and possess a complete understanding of construction drawings and details. Recognize slight differences in planes, shapes or shading to envision 2-dimensional pictures and diagrams as 3- dimensional objects.

• Direct and work with an Electrician Helper as directed by Supervisor or designated person.
• Accurately install conduit, wire, pre-fab assemblies, panel boards, light fixtures, devices, and other equipment per layout by the Supervisor or designated person.
• Minimize waste of materials, assure quality of the installation (no re-dos), and be consistent with Supervisors or designated person layout of task(s).
• Follow diagrams and blueprints to ensure that concealed wiring is installed before completion of future walls, ceilings, and flooring are installed.
• Measure, cut, thread, ream, assemble, and install conduit, using such tools as hacksaw, pipe threader and conduit bender(s).
• Pulling wire; splice wires by stripping insulation from terminal leads with knife or other means, twisting wires together, and applying terminal connectors and or tape.
• Connect wiring to light fixtures, power equipment, motors, devices, and other electrical apparatus, using hand tools and power tools.
• Test continuity of circuits, circuit wiring to insure compatibility and safety of components using test instruments.
• Observe functions of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement.
• May repair faulty equipment or systems
• Complete required paperwork.
• Monitor safety per Watson Safety Program.
• Demonstrate knowledge of all tools and equipment.
• Demonstrate efficient knowledge of trade.
• Coordinate installation with other trades.
• Responsible for getting materials and proper tools together to complete assigned task.
• Assist Supervisor or designated person to trouble- shoot electrical branch circuits and feeders.

Position Requirements:

Age: Must be at least 21 years old.

License: Must possess a current NC drivers license and a Class-A CDL (or have the ability to obtain a Class-A CDL within 90-days of employment).

Certifications: Applicable federal, state, and local certifications as required by job conditions or by the company.

Education: High School Graduate or GED.

Experience: Minimum of 6-years traffic signal experience required.

Working Conditions:

• Job requires working in all elements, depending on job location, time of year, heat, cold, rain, or snow.
• Must be able to utilize construction site sanitary facilities (Porta-Johns).
• Job requires employee to have required personal tools with him at all times (waist tool belt as worn weighs approximately 30 lbs.).
• Work from all types of ladders and be able to transport/relocate ladders unassisted.
• Employee s personal weight with tools cannot exceed the rated weight capacity of ladders used.
• Perform work at various heights, up to 90 from ladders, scaffolds, aerial lifts, cat walks and other safe work areas.
• Work in restricted areas (switch gear-room, manholes, utility tunnels and crawl spaces).
• Wear personal protective equipment as required in company's Safety Handbook.
• Able to work 40 hours per week plus overtime as required, to include night shifts and out-of-town work.

Skills:

• Positively identify colors of wire and other items as required.
• Comprehend reading of blueprints drawings, and schematics same.
• Bend conduit by hand with hand benders.
• Must have the ability to use safely the required power tools.
• Must be able to safely operate equipment (trenchers, lift trucks, aerial lifts, etc.).
• Capable of digging trenches, either by use of hand tools or power equipment.
• Comprehend and practice safe work procedures as outlined in Company Safety Handbook.
• Operate two handed tools as required.
• Operate company truck with manual and automatic transmission.
• Read and interpret maps, instructional manuals, work site directions, and written instructions.
• Operate and work from mechanical personal lifts (electric or gas powered).
• Assist Supervisor or designated person with energized circuits and equipment as outlined in the Company Safety Policy Manual.
• Effectively supervise electrical helpers to complete tasks assigned by a Supervisor safely and accurately.

Physical Function:

• Must hear and see well (either natural or with correction).
• Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead.
• Able to lift objects weighing up to 100 pounds, with frequent lifting and carrying of objects weighing up to 50 pounds.
• Tolerant to prolonged standing and movement on foot.
• Climb ladders (all types).
• Complete overhead work for extended periods of time.
• Responsible for securing tools and materials from storage areas to complete assigned tasks.
• Repetitive use of arms, hands, and fingers.

This description covers the principle duties and responsibilities of the job. The description shall not be interpreted as a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day.

Watson Electrical Construction Company LLC is an Equal Opportunity Employer